How To Start Windows 10 in Safe Mode While Booting?

In Windows 10, if you want to start Safe Mode with the F8 key, you must first configure it. Read on to find out why, how and to find out other ways to access Safe Mode in Windows 10.

There are some methods to access safe mode in Windows 10.

Why cannot you access Safe Mode with F8?

In previous versions of Windows, such as Windows 7, at the beginning of the startup, you can press the F8 key to access the Advanced Boot Options menu, where you can enable Safe Mode. But with Windows 10, the F8 key no longer works. It does not matter how many times you’ve tried it.You should have wondered why this is happening to you. Is it deleted from Windows 10?

In fact, the F8 key is still available to access the Advanced Boot Options menu in Windows 10. But since Windows 8 (F8 does not even work in Windows 8), Microsoft has disabled this feature to increase boot time. by default, that is, Windows 10 starts too fast to allow time for something to stop. If you want to use the F8 key to access the protected mode, you must enable the function manually.

How can you run F8 again?

The F8 boot menu function is disabled in Windows 10 by default. The good news is that you can make it work again with the Change in  “Boot Configuration Data” (BCD) command. BCD Edit is a tool designed to control the startup of the operating system. You can use it to easily enable the F8 boot menu. Follow these steps:

1) On the keyboard, press the Windows + R keys simultaneously to execute the Run command.

2) Type cmd and then press Ctrl + Shift + Enter to open an administrator command prompt. (You do not just press Enter or click OK as this will not open the command prompt in administrator mode).

3) Copy the following command and paste it at the command prompt. Then, on the keyboard, press the Enter key.

bcdedit /set {default} bootmenupolicy legacy

4) Restart your PC. Before the Windows logo appears, press F8 to access the Boot Options menu (see the following screen). Then select the safe mode.

Note: You can run F8 again only when you can log in to Windows. If you can not start Windows normally, you need to use another effective module.

How to bootWindows in safe mode?

In addition to the F8 version, there are many ways to start safe mode in Windows 10. In this article, you will learn the simplest methods. If a serious problem occurs (blue screen, for example) and you can not start Windows normally, use channel 1 to access the protected mode. If you are in normal Windows mode, use Mode 2. If you start the login screen (you can call the login screen), use Mode 3.

Method 1: enter safe mode when you can not start normally

Safe mode is loaded with a minimum of drivers, software and services. Normally, when Windows does not boot normally, safe mode will start without problems. It is useful for you to solve the problem here.

This method works effectively when you cannot start Windows 10 normally.

1) Make sure your PC is turned off.

2) Press the power button to turn on the computer, then hold it down until the computer turns off automatically (about 5 seconds). Repeat this procedure more than 2 times until the automatic repair preparation appears (see the following screen).

Note: This step displays the Prepare Auto Repair screen. When Windows does not start correctly, this screen appears and Windows attempts to solve the problem by itself. If you saw this screen the first time you turn on the computer, skip this step.

Then wait for Windows to diagnose the PC.

2) Click Advanced Options, the system will display the Windows RE (recovery environment) screen.

3) On the Windows Recovery (Environment screen), click Troubleshoot option.

4) On the troubleshooting screen, click Advanced Options.

5) Click on Start Settings to continue.

6) Click Restart. The computer reboots and opens another screen with a list of different options.

7) On the keypad, press the 4 button to enter safe mode without network. (If you need to search online after booting in safe mode, press the 5 button to enter safe mode with network access.)

Final words:

So this is how you boot windows in safe mode. This method works effectively. Windows 10 has lots of great features, but it does not not provide some basic option which older versions provided. So these small features should be turned by us manually. Hope this article helps you guys.

How To Make Columns In MS Word?

Create columns in Word: summary

You may need to create columns in Word for documents that need them, such as a newsletter. This is useful for separating text vertically. When you create columns in Word, the text flows from one column to another on the same page. Also, keep in mind that you can add columns to the entire document or to a selected section in a document. If you only want to add columns to a part of the document, you have two options. First you can select text or create a different section to add columns.

To create columns in Word, position the cursor where you want the columns to start. You can also select the text to separate in columns. Then click the “Layout” tab on the menu. Then click on the “Columns” button. Then choose from the predefined column options listed or click on the “Other columns” command to open the “Columns” dialog.

If you select the “Other columns” command, use the buttons, arrows, and checkboxes in the “Columns” dialog to set the number, width, and spacing of the columns to be created. In the “Preview” section of the dialog you will find a general description of the selections made. Use the “Apply to:” drop-down menu to choose the section or content of the document to which the columns apply. When finished, click “OK” to apply the columns and close the dialog.

Create columns in Word: instructions

  1. To create columns in Word, position the cursor where you want the columns to start.
  2. Otherwise, to add columns to only one part of the document, select the text to separate in columns or create a different section to add columns.
  3. Then click on the “Layout” tab on the menu.
  4. Then click on the “Columns” button.
  5. Select from the preset column options or click on the “More columns” command to open the “Columns” dialog box.
  6. If you select the “More columns” command, use the buttons, spinner boxes, and checkboxes in the “Columns” dialog to set the number, width, and spacing of the columns to be created.
  7. The changes you made can be seen in the “Preview” section.
  8. Next, use the “Apply to:” drop-down menu to choose the section or content of the document to which the columns will be applied.
  9. Then click “OK” to create the columns and exit the dialog box.

Final words:

And here is a quick article on how to create columns in microsoft word. though beginners may find creating columns is little confusing, this article explains how to create columns clearly. i hope this article help you all.

How To Find IP Address on Mac?

Knowing that the IP address of your Mac is important for setting up a network or sharing files, here is your IP address on Mac OS X; a simple way through the graphical interface and a more technical approach with the command line. These methods will remain same no matter you are connecte via Ethernet or wireless.

It works the same way in all versions of OS X on all Macs.

How to find the IP address on a Mac

You can find any Mac IP address or IP address in the Mac Preferences Network Settings screen:

  • In the Apple menu, select “System Preferences.”
  • Click on the “Network” preference panel
  • You can see your IP address on the right side of the panel.
  • Your IP address is the number that appears in the list. In the previous box, it is 192.168.0.100.

We will now examine the command line for Mac OS X:

Find your IP address through the Mac OS X terminal.

Here is how to find the IP address of your Mac via the terminal, which is often the most important.

Start the terminal located in / Applications / Utilities /

Write the following command:

ifconfig |
grep inet

You will see something that looks like this:

inet6 :: 1 prefix 128
inet6 fe80 :: 1% lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 net mask 0xff000000
inet6 fe80 :: fa1e: dfff: feea: d544% in1 prefixlen 64 scopeid 0x5
inet 192.168.0.100 network mask 0xffffff00 transmission 192.168.0.255

Your IP address is usually close to the last “inet” entry and, in this case, 192.168.0.100, but it will not be 127.0.0.1 because this is the return loop address of your machine. Since you cannot ignore 127.0.0.1, it will be your IP address which will be the other IP between “inet” and “netmask”

The other command-line option is to use:

ipconfig
getifaddr en1

which only reports the en1 IP address (usually wireless). You can also change it to en0 for cabling / Ethernet. I’ve heard that ipconfig is not compatible with all versions of Mac OS X, so I did not recommend it as a first priority. However, using ipconfig, you can also configure your IP address from the command line.

Find your external IP address in Mac OS X.

Your external IP address is what is transmitted to the world rather than your local network (for example, behind a wireless router). It’s easier to find a this suing a terminal command:

curl
ipecho.net/plain ; echo

or

curl whatismyip.org

This will be give your IP address. This is how you can find your IP address when you are using a mac OS. Hope this article helps you all.